Augvape Vtec 1.8 Box Mod Review

Enough time has arrived for further severe vape devices – take a break for a few days from the AIO sets that occupied the front side web pages of our own portal. Another new product was declared inside the Augvape camp, plus they decided to upgrade probably the most shocking boxing mods with their assortment. Forefather, needless to say, you should be common, nevertheless, you will find not so numerous adjustments. It is on them I will attract your focus, seeking to not grind much.

Augvape VTEC I.8 MOD

Augvape VTEC I.8 MOD -
Dimensions: 87.5 x 45 x 29.2mm 
Weight: 168g Shell 
material: zinc alloy + plastic 
Power: 2 x 18650 
Output power: 5 – 200W 
Voltage range: 0.5 – 7.2V 
Operating mode:POWER, BYPASS, VV mode, V mode, Auto mode 
Supported resistance: 0.05 – 3.0Ω 
Protection: against low / high resistance, from overheating, from short circuit, from reverse polarity, from overcharge / overdischarge 
Connector type: steel 510, pin gold-plated , spring-loaded 
Screen / diagonal: yes, color 
Micro-USB port / charging: yes, charging current 1.2A 
Update / firmware: yes 
Color: see photo below 
Augvape VTEC I.8 MOD -
Options
– VTEC I.8 mod 
– USB cable 
– user manual 
– warranty card
Augvape VTEC I.8 MOD -

So, the appearance of the boxing mod has changed small – probably, you do not even immediately differentiate it from the forerunner. This continues to be a rectangle-shaped box, stylized as being a cylinder obstruct include of the popular Honda motor.

Augvape VTEC I.8 MOD -

The starting variety of design should not be known as rich – you can find only three alternatives, even though the original is one of them.

Augvape VTEC I.8 MOD -

The initial difference that catches your eyes will be the connector landing pad. Now it’s just darker as opposed to a lined edition.

Augvape VTEC I.8 MOD -

The second significant distinction was the place beneath the skin on the back of the product.

Augvape VTEC I.8 MOD -

The front side part has evolved small. Firstly, we see the inscription “VTEC” – indeed, now, or instead, finally, that’s it. Next, the ability realignment items have evolved, and so forth. So far as I understand, now it is actually shielded from humidity penetrating inside it. The flame button, as before, is hidden, the show is tiny but quite helpful.

Augvape VTEC I.8 MOD -

Access to the battery power inner compartment is also from the hinged cover in the bottom in the device. The programmers report that they caused it to be a little bit more reliable and greater their “wear resistance”, however, it was not possible to visually evaluate these changes.

Augvape VTEC I.8 MOD -

In addition, there are minimal alterations in functionality. Varivolt setting additional – um … you say. But it might not be preferable to add thermal manage. Well, that’s how the developers reasoned)

Augvape VTEC I.8 MOD -

The price is $59.99.

Augvape VTEC I.8 MOD -

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Augvape Vtec 1.8 Box Mod
Hot Sale Recommendation:

Vladdin Eden Vape Pod System Kit

Smok Novo 2 Pod System Kit

Smok RPM40 Vape Pod System Kit

Voopoo Drag Nano Kit

Innokin Adept Starter Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Rincoe Tix Vape Pod System Kit Review

And again, the fresh new AIO set actually reaches the middle.This time the company suffered Rincoe.They already walked up experience with this field, plenty of time will come for essentially significant devices.In buy never to spend your time on foreplay, I propose to begin courting immediately.

Rincoe Tix Vape Pod System Kit 

Rincoe Tix POD kit - decorated box ...
Dimensions: 90.7 x 43 x 19mm 
Weight: unknown 
Case material: zinc alloy + plastic 
Power: built-in 1000mAh 
Cartridge capacity: 2ml 
Evaporator resistance: 0.8 / 1.0Ω 
Voltage range: 3.2 – 4.2V 
Operating mode: POWER 
Supported resistance: 0.3 – 3.0Ω 
Protection:from low / high resistance, from overheating, from short circuit, from overcharging / overdischarge 
Screen / diagonal: no 
Micro-USB port / charging: yes, Type-C, charging current 1A 
Color: see photo below 
Rincoe Tix POD kit - decorated box ...
Options
– Tix POD mod 
– replaceable cartridge (pre-installed) 
– replaceable evaporator 2pcs 0.8 / 1.0Ω (one pre-installed) 
– USB cable 
– lanyard 
– user manual 
– warranty card
Rincoe Tix POD kit - decorated box ...

The look is not really quite typical, needless to say, we now have already seen this, but this is simply not a hackneyed develop element within the fm fm radio.Therefore, it proved pretty nice.Dimensions are not saying that they are little, however, you cannot tag an essential novelty either.The box came rectangle-shaped, nevertheless the edges and finishes within the interests of significantly better ergonomics are prudently rounded.

Rincoe Tix POD kit - decorated box ...

With shades, complete stuffing – as much as seven design options.Moreover, there is simply one “calm” of those.

Rincoe Tix POD kit - decorated box ...

Replaceable container of regular capacity, utilization of it opens up after taking out the part panel.Also, anyway, you may execute refueling.

Rincoe Tix POD kit - decorated box ...

You can find 2 forms of replaceable evaporators, one of these is created on the grid.They are designed for numerous evaporation varieties, and, properly, for refreshments with various smoking items.

Rincoe Tix POD kit - decorated box ...

In order to help this “assortment”, the developers have utilized the ability to change the airflow.

Rincoe Tix POD kit - decorated box ...

The primary figure hides inside itself a built-in electrical battery power in the regular capacity.She is destined to expense about one hour or so.Cause Type-C connector.

Rincoe Tix POD kit - decorated box ...

The fireplace alternative is disguised being a attractive location as a shield, and is located in a useful spot.But the entire user interface is found on the front end.Here you will see the small vital for modifying the efficiency voltage – there are three options altogether.By just how, to alert the home owner in the picked out setting, a impartial Guided sign was laundered directly down.The 2nd indication – the bottom just one – is mainly responsible for the battery education.

Rincoe Tix POD kit - decorated box ...

Additionally, one of many ends shows a set up for any complete lanyard for putting on round the throat.

Rincoe Tix POD kit - decorated box ...

The purchasing price of $ 40.9.

Rincoe Tix POD kit - decorated box ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Rincoe Tix Vape Pod System Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Smok Novo 2 Pod System Kit

Veiik Airo Vape Pod System Kit- Limited Edition

Voopoo Drag Nano Kit

Eleaf Rotor Sub ohm Tank

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Vaptio ET AUTO Vape Pod System Kit Review

Vaptio has released the ET Auto Kit. The teardrop-shaped device was equipped with a bright backlight and a replaceable cartridge with a patented ceramic evaporator that works without cotton.

On December 22, Vaptio introduced the ET Auto Kit on Instagram  . The device was clad in a lightweight polymer case with a narrow profile and a wide base, giving it a peculiar pear-shaped shape. The minimalism of the external decoration was violated only by a black triangle with the head of a certain humanoid. The palette of colors included seven colors. The bottom was cut and supplemented with a micro-USB port, on the sides made two red indicators.

Vaptio ET Auto Kit - Space Sports Car ...

The device is powered by a small battery with a capacity of 550 mAh and is capable of delivering up to 12 watts of power. Ignition occurs without the help of buttons. The replacement cartridge has a standard design and an unusual ceramic evaporator with a honeycomb structure and no need for cotton. The tank holds 1.5 ml, the filling hole is at the bottom.

The kit includes a cartridge, a USB cable and instructions.

Main characteristics:

  • Size – 74.5 by 47 by 16 mm
  • Maximum power – 12 watts
  • 550 mAh built-in battery
  • Puff activation
  • Tank volume – 1.5 ml
  • Resistance 0.5 to 2.0 ohms

Parameters of Vaptio EAUTO KIT

Features:

Comes with cool ET-Head design and tiny size

Powered by 550mAh battery with quick charge system

Applying patented ceramic Atomizer (Cotton-Free Tech)

Magnetic pod connection for convenient operation

Simple operation without any operation

Innovative LED tail lights remind your battery status

Features of Vaptio ET AUTO Kit

Package Included:

1 * ET AUTO Mod

1 * ET AUTO Tank

1 * Micro USB Cable

1 * User Manual

Package Included of Vaptio ET AUTO kit

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Vaptio ET AUTO Vape Pod System Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Eleaf Rotor Sub ohm Tank

Innokin Adept Starter Kit

Voopoo Drag Nano Kit

Innokin Jem Vape Pen AIO Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

GeekVape Zeus X RTA Review

Today I have an interesting guest who has reincarnated many times already and has a decent army of fans. Frankly, the last experience with his brethren happened to me quite a while ago, but I still try to compare them a bit. 

GeekVape Zeus X RTA Case material: stainless steel Atomizer type: RTA Capacity: 3.5 / 4.5ml Diameter: 25mm landing / 26.5mm maximum / 29mm on bubble glass Height: 43mm with dark drip type / 39mm without drip type Connector: 510, pin gold-plated Weight: 61g Color: see photo below Package contents – Zeus X RTA – 2pcs pre-wound spirals


– Cotton 2 laces 
– Allen 
key – Wrench screwdriver 
– Spare orings 
– Spare screws – Spare 
glass 
– Additional 810th Drip type 
– Adapter for 510th Drip types 
– User manual 
– Certificates, etc. I can not say about the set – it is just gorgeous, there is everything for the start, as well as for a little customization of the tank. Our guest looks decent. I do not even know why, but I liked it. It is likely that the impression is now smoothed round, in contrast to its predecessors, the geometry of the lid, as well as a very original preset drip type.



Dimensions wide decent, especially with bubble glass. And without it, when you hold it in your hand, it seems that it is something solid, powerful. Accordingly, the weight of the device turned out to be somewhat large. On lightweight mods, it may outweigh, although with dunobochnikami, which he most likely is designed for is unlikely to happen. Drip two types, both 810th landing. One is made of the dolrin, the second of the ultem, the latter is slightly higher. Although I liked the dark version more visually, it collects much more condensate than its translucent counterpart. The adapter for the 510th copies was also put, but I don’t know why it is needed here.



The cover is quite massive, the locking mechanism is half-turn. It is easy to get into, for convenience, there are non-acute risks. Under the cover are two small holes for refueling. You see how much they are recessed below the edges of the tank, and inside the shaft rises, therefore, the nozzles of the bottles do not penetrate directly into the holes, hanging above them. I will not say that this creates difficulties in refueling, but probably it was not worth lowering them so low. Naturally, the construction cover is to blame. Ring tightening adjustment with a stopper, it is removable. The move is pretty tight though there are risks. Therefore, by accident, adjusting the airflow, you can open the cover. I will not mention this moment as critical, because it happens quite rarely, at least for me. The size of the air intake holes 13 x 2mm.

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40

 
The delay turned out sooo free, I covered it a little more than half. And I would like to cover up more, but then the steam is very hot and the taste is lost. The capacity of the tank is not the greatest, it can be increased due to the complete glass bubble. And even with him, the tank eats slush decently, and it’s still clear two spirals. As you understand, the non-spill-based constructive of our hero obliges him to have a double dome. Internal processing of the latter under the cone. The diameter of the mine is approximately 7.5mm, and the diameter of the dome at the base is 17mm. It is inserted into a larger one and is fixed by an oring, but remains movable for rotation of the base when it is wound. On its side there are three rows of holes, so that the bottom two rows are beating on the coyle from the side, and the top is obtained as if from above – at an angle to the deck.




I think many zevovody now again begin to lament about the extra holes. In part, I agree – in the top row, it seems, it was better to leave not five, but three holes. Why not remove them at all, I do not know, I also thought so on the first photo, but somewhat changed my mind after the tests. More on that later. Deca is quite simple and almost easy to maintain.



Two racks rise above it to fix the two spirals correctly. The screws are pre-installed under the slot, another two spare sets – one of them for the complete hex. The distance between the corresponding screws is 7mm. Under the racks there are special grooves in order to cut the coil legs after installation. Yes, it can be done, but, firstly, it is not particularly convenient, and secondly, the stings of your nippers should be very sharp and thin in order to crawl into this gap. Near the racks you can see two keys that are combined with the grooves on the inner dome and rotate it when winding the base.


It is a tricky business to fuel the tank, but there is one thing. It is inconvenient to mark the airflow holes, because if you tighten it, you won’t see a damn thing through the small holes. Therefore, it will have to be applied from the side, since it will be necessary to do this once or twice. Again, the design of the dome is limited to adjusting the position of the spiral. The bottom airflow holes peel above the very top of the pillars, then it turns out that the top beats exactly on top of the helix. It is impossible to make the latter fall even on the center of the spiral, for the dome is already beginning to narrow. You can, of course, push the coils closer to the center of the deck, but then they are significantly removed from the blower. In short, I chose a neutral position, in which the lower to the bottom, central to the center, and the upper, whatever one may say, is the captain on top – obvious, isn’t it?)


The holes for laying wool seemed to me average, and I decently combed the cotton. However, after that, he even walked into them a little. So here, as it seems to me, everything is fine – there is enough space for cotton from two spirals. Naturally, you will have to leave rather long ends, since the pillars rise significantly from the bottom of the base. At the same time, I did not observe absolutely any zhizhezhubaniya, perhaps between puffs, the cotton wool is moistened not particularly quickly – uncritically.


The taste of the tank is decent, I will immediately calm the admirers of Zeus – as it seems to me, this is the most successful copy in the line, including the taste transfer. He lays out the ingredients for the liquid, of course, not like a dripka, but it is understandable. Moreover, the dilution of steam is almost not felt. That is why I made a reservation about the extra holes in the dome. It seems to me that they almost do not interfere, but probably without them the taste was a little brighter, but the bulk probably suffered, because here it is decent. At the same time, the tank lid is not heated at all (thanks to the non-spill constructive structure), so you can not worry about your lips when using a low-profile complete drip type. Pin is gilded and performs decently. Impressions of use

 
 
I quite liked the tank, although lately I have moved away from the use of double-spiral specimens. It is assembled perfectly – there is absolutely nothing to complain about. Deca is still easy to maintain, and the equipment is cool. Well, traditional cherries for him are non-spill constructive, design and decent taste transfer. 
 

  • Non-spill constructive
  • Design (IMHO)
  • Decent taste transfer
  • Equipment
  • Price

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: GeekVape Zeus X RTA
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Vladdin Eden Vape Pod System Kit

Smok Novo 2 Pod System Kit

Voopoo Drag Nano Kit

Vaporesso Gen TC Box Mod

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Joyetech eRoll Mac Portable Charging Case Review

Very interesting new product from the company Joyetech called eRoll Mac BatteryThe article will talk about 2 options for configuration. We will not torment, rather in the review!

vidnanabor

Equipment

On sale there are two versions of the device:

– Simple whale: eRoll MAC Battery, eRoll MAC Cartridge, manual, cable for charging.

– Advanced whale (in the near future will go on sale): eRoll MAC Portable Charging Case, eRoll MAC Battery, 3 eRoll MAC Cartridge, manual, charging cable, carrying case.

vnaborre

Dimensions:

Height: 100 mm, 
Diameter: 9.2 mm, 
Weight: 17.3 g

gabarit

Technical specifications

Battery capacity: 180 mAh, 
Tank volume: 0.55 ml, 
Evaporator resistance: 1.5 Ohm, 
Declared charging time: 30 minutes, 
Output voltage: 3.7 V.

cvetta

E-cigarette review

In 2014, JoyeTech introduced the first version of the device, called eRoll-C. In general, the whale has not changed much, only together cartridge cartridges use clearomizers with evaporators on ceramics.

vrazborre

The electronic cigarette received a metal frame and an outer plastic casing. The device is sold in three colors: gray, black and red. A atomizer with a 1.5 Ohm non-replaceable vaporizer is used as an atomizer.

vidpoda

Drip-type is made of plastic and wound on the duct with a thread. Additionally, it is the top cover of the filling.

vidnapodu

Due to the total diameter of 9.2 mm, the hole is rather small. Therefore it is necessary to use bottles with a thin spout. The volume of the tank is 0.55 ml, which is very small compared to other devices.

zalivgigi

Air is drawn in through one small hole at the bottom of the tank. Below is a 510 connector on the thread. A battery is nothing interesting. Above is a connector. The operation of the device occurs when tightening due to the air sensor. Battery capacity is 180 mAh. Below is a contact for charging or battery station use.

zaradka

Battery Station Overview

The station received the same colors as the electronic cigarette. The main feature is the built-in 2000 mAh battery.

vidpodsystem

It can also act as a protective case: it can carry one cigarette assembly and two additional cartridges. On the side of the device there is a charge LED indicator, an electronic cigarette battery charge indicator and a USB type C port for charging the station itself.

The indicator is made in the form of four lights, where 4 will be lit at 75-100 percent, 3 – at 50 to 74 percent, 2 – from 25 to 49, and 1 to 24 percent. The e-cigarette indicator will turn on while charging and will go out after the process ends. To charge an electronic cigarette, it is necessary to insert it with the contact part into a special recess in the bottom.

vidnadevase

Technical parameters of the station:

Length: 65 mm, 
Width: 115 mm, 
Height: 12 mm, 
Weight: 128.3 g, 
Battery capacity: 2000 mAh, 
Maximum charge current: 2.0 A.

vidvruke

Impressions

The device turned out quite strange. In 2019, we get the functionality from 2014, with no significant changes to eRoll. The volume of the tank will be enough for a maximum of half a day of use, the battery will be discharged even faster. In this form, the sale of a separate electronic cigarette does not look very attractive to purchase.

vidnaego

The version with the battery station is already more interesting, since the kit additionally comes with two spare cartridges. As for the consumer audience can only guess. As an option – the company wanted to make a set for girls, as is the case with the first version. But everything will rest on the price: if the maximum set costs less than $ 25, the device can be watched for purchase. 

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Joyetech eRoll Mac Portable Charging Case
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Voopoo Alpha Zip TC Kit

Geekvape Aegis Solo TC Box Mod

Voopoo Drag Nano Kit

Vaporesso Gen TC Box Mod

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html