Eleaf iStick Mix Starter Kit Review

Eleaf has released the iStick Mix Kit. The “epoxy” kit was assembled from a 160-watt two-battery box-mod box and an unattended Ello Pop tank with a rubberized bulb.

    The boxmod was packed in a rectangular case with rounded corners and a convex silhouette. The ends trimmed polymer panels that combine different patterns and patterns, in the palette of colors included five variations. A familiar set was placed on a narrow front side – a round fire button, a monochrome display and two control keys. USB port installed on the side. Batteries hidden under one of the removable sidewalls. 

   The branded Avatar Chip card supports varivatt, thermal control, bypass and several memory modes. Output power can reach 160 watts. Resistance ranges from 0.05 to 3.0 ohms. Two 18650 batteries are used for power supply. When charging via USB, you can use up to 2.5A current. 

Ecig Wholesale China,e Cigarette Online Shop – AVE40

   The body of the complete tank Ello Pop is made of stainless steel and is completed with an “epoxy” drip tip in the fashion color. The filling hole is under a massive firebox with protection from playful children’s hands. Glasses of plump flasks are surrounded by thin rubber rings. There is a rotating ring blowing with wide notches.

Atomizer ELLO POP

 The ELLO atomizer has been used by Eleaf more than once in its starter kits, but the manufacturer began to use the ELLO POP – an updated version. To say that it is fundamentally different from the previous version is difficult, because one of the glasses has been modified (there are rubber bands on it for protection) and a slightly modified design. 

The atomizer works on quite interesting evaporators of the HW-M2 and N2 series, which work on a grid, and they use a grid with different cells. It is worth saying that such evaporators will please the vapers with their taste transfer and bulk – the grid will make itself felt.

Top Vape Tanks, Vape Atomizer, Clearomizer Online | Ave40

Features Of Eleaf iStick Mix Starter Kit 160W with ELLO POP Atomizer 6.5ml/2ml

Parameters

Eleaf iStick Mix MOD
Size: 52 x 27 x 83mm
Battery type: Dual 18650 batteries (not included)
Output wattage: 160W max
Resistance range: 0.05-3.0ohm
Output voltage: 0.5V-9V
Thread: 510

ELLO POP
Diameter: 28mm(6.5ml)/26.5mm(2ml)
Height: 56.5mm
E-liquid capacity: 6.5ml/2ml
Coil: HW-M2 0.2ohm Head (kanthal, 40-90W)
HW-N2 0.2ohm Head (kanthal, 40-90W)
Thread: 510 thread

Eleaf iStick Mix 160W Kit with ELLO POP Atomizer

Features:

Dual 18650 Cells with 160W Output
Artistic Double-sided Resin Panels
Steady and Efficient Recharging
Distinctive in Molding Label(IML) Technology
Avatar Chip for Stable and Fast Fire Speed
New HW-M2 / HW-N2 Coils with LPSC Technology
Innovative Bodyguard on the 6.5ml Glass Tube
Easy Slide Top Filling & Adjustable Bottom Airflow Control
Smart Child-proof Structure

Package List:

It comes with

  • 1× iStick MIX MOD(without cell)
  • 1× ELLO POP Atomizer 6.5ml/2ml
  • 1× HW-M2 0.2ohm head
  • 1× HW-N2 0.2ohm head
  • 1× QC3.0 USB Cable
  • 2× User Manuals
  • Spare Parts

Eleaf iStick Mix 160W Kit with ELLO POP Atomizer

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available:Eleaf iStick Mix Starter Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Voopoo Alpha Zip TC Kit

Vaporesso Luxe 220W TC Kit

Voopoo Drag Nano Kit

OUMIER Armadillo RDA

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Teslacigs Invader 4X RDA Kit Review

I invite you to get acquainted with the regular reincarnation of the beloved Invader line by Teslacigs. I don’t remember what kind of account this one will be, however, the developers here have completely departed from the original (all revered) performance in a metal case. 

Teslacigs Invader 4X Vape Kit 
Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
Dimensions: 88 x 52 x 26mm (only mod) 
Weight: 75.5g Case 
material: plastic, including ABS 
Power supply: 2 x 18650 
Output power: up to 280W 
Voltage range: 3.0 – 8.0V Peak 
current: 53A 
Operating mode: POWER, VV 
Supported resistance: 0.08 – 3.0Ω 
Protection:Low / high resistance against overheating, short circuit, reverse polarity, overcharge / overdischarge 
Connector Type: Steel 510, gold-plated pin, spring biased 
Screen / diagonal: No 
Micro-USB port / charging: is, the charging current is 1.5A 
Color : see photo below 

Ecig Wholesale China,e Cigarette Online Shop – AVE40

Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
Package (probable) 
– Invader 4X mod 
– Invader 4X RDA 
– Spare Orings 
– Spare Screws 
– Hex Key 
– Cotton 
– Preloaded Spirals 2pcs 
– USB Cable 
– User Guide 
– Warranty Card
Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
There is no information on the complete dripka at all, probably, it will be 24 mm in diameter, with side adjustable blowing according to the type of second med dog. 
Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
However, these racks are definitely familiar to me, we have already seen exactly such ones, but I don’t remember exactly where. 
Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
So, the boxing mod is now completely made of plastic – aluminum alloy is in the past. As it seems to me, now there is no remnant of brutality, but the weight of the device is just a penny. 
Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
From the start, the developers offer only four options for the design of the case. And among them the original white color is noticed, which definitely does not fit in with the brutal past of this box.

Vape Starter Kit, Wholesale E Cig Starter Kits – AVE40

Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
The control panel has retained its original constructive – a large fire button and a five-position potentiometer. Well at least the functionality remains unchanged – it is still the good old varivolts with decent output power, which of course is only on paper. 
Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
The battery compartment hides under a removable side panel, which, in turn, is probably fixed by magnets. 
Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
The ability to charge the batteries is saved, the current is decent. Connector for this purpose you will find in the same place opposite to the removable cover side. 
Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...
The price is still unknown – the release has not yet taken place, but I do not think it will be high. I also assume that the mod will be sold separately from this doubtful dripk, which somehow turned out to be paired with a bar-volt. 
Teslacigs Invader 4X Vape Kit - finally worn out its brutality ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Teslacigs Invader 4X RDA Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Smok Priv N19 Vape Kit

Voopoo Drag Nano Kit

Vaporesso Sky Solo Plus Starter Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

WOTOFO Bravo RTA-Banked airflow system

In this article we will look at an interesting novelty from the company Wotofo called Bravo RTA.

Recently, the Chinese company Wotofo quite rarely by the standards of the vaping industry pleases its fans with interesting novelties. Devices from this manufacturer are often obtained at least worthy of attention, although they rarely come out. The beginning of 2018 will probably be very successful for the guys from Wotofo, since they presented a rather curious RTA class device. Meet the potential hit of Bravo RTA sales.

Wotofo Bravo RTA Appearance

Design features

The “Bravo” tank is, one might say, a classic modern atomizer with standard characteristics: the diameter of the device is 25 mm, and its height is 48.9 mm. The device will be sold in six possible colors. Made by Bravo RTA in 304 stainless steel.

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40

Wotofo Bravo RTA Appearance

By default, the device comes with an 810th epoxy resin (or Resin) type. Naturally, any other types of this format will fit here, as well as the 510s thanks to the special adapter that comes with it.Refueling Wotofo Bravo RTA

Refueling in the tank, according to tradition, the top with fairly wide openings for pouring fluid. It can be assumed that there will be no problems with any packaging at all. Bravo RTA, by the way, holds 4.5 ml of liquid, which is already quite a lot. In addition, it is possible to expand the volume to as much as 6 ml with the help of the so-called “pot-bellied” glass. Included, of course, everything you need is available.

Wotofo Bravo RTA construction

One of the main chips in Bravo RTA is its base, designed for the installation of two spirals. An interesting fact: in five out of six colors of the atomizer, the base will be steel, and only in the gold version is the base covered with gilding.

Top Vape Tanks, Vape Atomizer, Clearomizer Online | Ave40

Wotofo Bravo RTA construction

For fixing the coils correspond to as many as four cross screws. The system is not new, but with its own features. Thus, the clamping plates when loosening the screws will fall down under the action of gravity, thereby freeing the holes for the legs of the spirals.

Wotofo Bravo RTA Review. First look

The holes of the bottom blower are made slightly beveled and are located directly under the spirals. Four round grooves are set aside for laying cotton. The whole construction works like a GTA system.

Specification

  • Height: 48.9 mm
  • Diameter: 25mm
  • Spaciousness: 4.5 ml / 6 ml
  • Production material: 304 SS
  • Top dressing
  • Lower airflow
  • 810 drip types

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: WOTOFO Bravo RTA 
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html